24" on center, 10 ft wall
Stud, joist and deck-board layout for a 10-foot run at 24" on center — how many pieces, and where every mark lands measured from the end of the plate.
10 ft wall @ 24" O.C. =
=6 studs
Studs / joists
6
Bays
5
Spacing
24" O.C.
Wall length
10' 0"
How many
A 10-foot wall is
120" long. At 24" on center that's ceil(120 ÷ 24) = 5 bays, and one more stud than bays for the end — 5 + 1 = 6 studs. The same count and marks lay out floor joists or deck boards on the same spacing.Pull the tape
Every mark from the end
| Stud # | Mark (from end of plate) |
|---|---|
| 1 | 0" (end) |
| 2 | 2' 0" |
| 3 | 4' 0" |
| 4 | 6' 0" |
| 5 | 8' 0" |
| 6 | 10' 0" |
The same math, offline
Every calc, on your tape measure — even with no signal.
TapeMath for iPhone runs this exact engine offline, adds rafters, stairs, studs, pitch and a paperless tape, and the key layout your thumbs already know. $9.99 once — no subscription, ever.
See the appComing soon — TapeMath is in final App Review. Meanwhile, use the free web calculator →